TDS1 Water Quality Test Pen

Clear

£0.00

1/5

TDS1 Water Quality Test Pen

TDS1 Water Quality Test Pen

TDS1 Water Quality Test Pen is a simple water testing tool that helps measure Total Dissolved Solids in drinking water. It is useful for checking TDS levels before and after filtration and comparing tap water with filtered water at home.

This TDS1 Water Quality Test Pen is included free with Nova 100 orders where offered.

Included free with Nova 100 orders where offered, the TDS1 pen helps customers better understand everyday drinking water quality through quick and simple readings.

Key benefits:
• Measures TDS levels in drinking water
• Helps compare tap water and filtered water
• Useful before and after reverse osmosis filtration
• Simple digital reading for home water quality awareness
• Included free with Nova 100 orders where stated

£0.00

TDS (Total Dissolved Solids), which indicates the dissolved solids in 1 liter of water, measured in milligrams per liter (mg/L) or ppm.

TDS includes non-volatile soluble salts, organic matter, and insoluble particles that can pass through filters.
0-50 High Purity
51-100 Pure water
101-150 General Purity
151-200 Light Scaled water
201-300 Scale Formation
301-600 Severe Scale formation
601-1000 Poor taste
1000+ Unsuitable for drinking

Measurement Range: 0-9990 PPM
Battery Specification: 3V Button Battery
Operating Current: ≤2mA
Battery Capacity: 50mAh
Product Dimensions: 150×17×10.8mm
Product Weight: 32g
Operating Environment: 0℃~60℃

TDS Detection Pen Usage Instructions
Remove the pen cap, press the power button, and fill a water cup 2/3 full with the water to be tested.
Place the pen into the water to be tested and gently stir.
Wait for the reading to stabilize, then observe the measurement on the display screen.
After use, shake off or wipe dry the water from the pen tip, replace the pen cap, and turn off the power.
Remove the battery compartment.