Water Quality Test Pen TDS1

Clear

£0.00

1/5

Water Quality Test Pen TDS1

Water Quality Test Pen TDS1

Other Water Quality TDS Tester Pen. Free to all customers who concerned about their water safety.

£0.00

TDS (Total Dissolved Solids), which indicates the dissolved solids in 1 liter of water, measured in milligrams per liter (mg/L) or ppm.

TDS includes non-volatile soluble salts, organic matter, and insoluble particles that can pass through filters.
0-50 High Purity
51-100 Pure water
101-150 General Purity
151-200 Light Scaled water
201-300 Scale Formation
301-600 Severe Scale formation
601-1000 Poor taste
1000+ Unsuitable for drinking

Measurement Range: 0-9990 PPM
Battery Specification: 3V Button Battery
Operating Current: ≤2mA
Battery Capacity: 50mAh
Product Dimensions: 150×17×10.8mm
Product Weight: 32g
Operating Environment: 0℃~60℃

TDS Detection Pen Usage Instructions
Remove the pen cap, press the power button, and fill a water cup 2/3 full with the water to be tested.
Place the pen into the water to be tested and gently stir.
Wait for the reading to stabilize, then observe the measurement on the display screen.
After use, shake off or wipe dry the water from the pen tip, replace the pen cap, and turn off the power.
Remove the battery compartment.